IFToMM 2011 World Congress on the Theory of Machines and Mechanisms

Prof. Takeda has given a presentation at the international conference, held at Guanajuato, Mexico.

asistentes.jpg

IFToMM 2011 World Congress on the Theory of Machines and Mechanisms

Prof. Takeda has given a presentation at the international conference, held at Guanajuato, Mexico.

asistentes.jpg

Special lecture of Prof. Eduardo Castillo Castaneda

Prof. Eduardo Castillo Castaneda (National Polytechnic Institute) has given a special lecture as followings.

Date and Time June 10th(Fri), 2012, 16:40-17:40
Place Room 325, Ishikawadai 6th bldg
Title Calibration and measurement of the stiffness of robot manipulators using image processing
Speaker Prof. Eduardo Castillo Castaneda
Instituto Politecnico Nacional CICATA Unidad Queretaro, Mexico
Abstract The precision and rigidity are key concepts that determine the performance of any manipulator. Devices to quantify these variables are generally quite expensive and limited in the workspace that can cover, also are not well adapted to measure the orientation of the manipulator. The aim of this talk is to present a technique for data acquisition and image processing to measure with high precision, the position and orientation of the end effector of any manipulator. These measurements are used for robot calibration purposes and to estimate its stiffness in a large workspace.

(Announcement pdf)

Special lecture of Prof. Eduardo Castillo Castaneda

Prof. Eduardo Castillo Castaneda (National Polytechnic Institute) has given a special lecture as followings.

Date and Time June 10th(Fri), 2012, 16:40-17:40
Place Room 325, Ishikawadai 6th bldg
Title Calibration and measurement of the stiffness of robot manipulators using image processing
Speaker Prof. Eduardo Castillo Castaneda
Instituto Politecnico Nacional CICATA Unidad Queretaro, Mexico
Abstract The precision and rigidity are key concepts that determine the performance of any manipulator. Devices to quantify these variables are generally quite expensive and limited in the workspace that can cover, also are not well adapted to measure the orientation of the manipulator. The aim of this talk is to present a technique for data acquisition and image processing to measure with high precision, the position and orientation of the end effector of any manipulator. These measurements are used for robot calibration purposes and to estimate its stiffness in a large workspace.

(Announcement pdf)

New Assist. Prof. Matsuura joined to the lab

Dr. Daisuke Matsuura has joined to our laboratory as a new assistant professor.